Amplifiers / Preamps
A-02
Stereo Power Amplifier

Abundant use of high-grade components pursued for both their properties and audibility
Securing signal clarity and minimizing transmission loss maximizes pure amplifier performance. Rigorously selected components are used to satisfy to the greatest extent possible such requirements for power amplifiers. Highly reliable XLR input terminals that boast contact performance and Esoteric's original RCA input terminals are just some of those implementations. WBT nextgen WBT-0710Cu speaker terminals are also employed. These conductor cores utilize pure copper with gold plating to achieve high conductivity and low resistance. Moreover, the A-02 employs high-grade components such as electrolytic capacitors and transistors with excellent high frequency characteristics achieved through property examination and repeated trial listening.
Ingenious chassis structure that intricately fuses precision and vibration suppression
Internal circuit components are separated into dedicated inner compartments for each circuit, partitioned by 2 mm steel walls. The bottom chassis utilizes 5 mm thick steel for additional isolation that prevents interference between circuits and minimizes the adverse effects of resonance caused by internal and external vibration. The extremely robust inner chassis is composed of a 20 mm thick aluminum front panel and 5 mm thick top. It is also supported at four points on Esoteric-original pinpoint feet. These and other measures help to keep the housing highly rigid and resonance-free. What's more, an approx. 41.5 kg weight (91.5 lbs.) speaks volumes for the rigidity of the A-02.
Tranquil yet strong expression in a design that evokes rich musical qualities
A design idea that shows off high-end aspirations through and through comes into being in a simple body form. That form incorporates structural beauty, featuring bold design with delicate shadowing as well as black alumite-processed large heat sinks symmetrically located on the left and right sides of the housing. A sense of unity with Esoteric's high-end lineup is also projected, bringing about unrivaled presence when putting together an audio system.
| Speaker Outputs | |
| Rated output power | STEREO BTL 800 W (1 kHz, 8Ω ) |
| Maximum output power | STEREO 250 W + 250 W (1 kHz, 8Ω ) (JEITA) 500 W + 500 W (1 kHz, 4Ω ) (JEITA) BTL 1,000 W (1 kHz, 8Ω ) (JEITA) |
| Frequency response | 5 Hz - 100 kHz (1 W, 8Ω ,±1 dB) |
| Signal-to-noise ratio (S/N) | 117 dB or more (JEITA) |
| Total harmonic distortion | 0.009 % (1 kHz, 8Ω, Rated output power) |
| Minimum required impedance | STEREO 4Ω / BTL 4 Ω |
| Gain | 28 dB |
| Analog audio inputs | |
| Jacks | RCA jacks 1 stereo / XLR jacks 1 stereo |
| Input impedance | RCA 150 kΩ / XLR 320Ωk |
| General | |
| Power supply | AC 230V 50Hz / AC 120V 60Hz / AC 220V 60Hz |
| Power consumption | 550 W |
| External dimensions (W x H x D) | |
| 445 x 220 x 430 mm (17 1/2" x 8 5/8" x 16 15/16" ) (including protrusions) | |
| Weight | 41.2 kg (91.5 lb) |
| - This product is available in three different power supply variations shown in the chart above. Make sure that the voltage shown on the rear panel matches the AC line voltage in your area. - The shape of the AC inlet and plug of the supplied power cord depends on the voltage rating and destination country. |
|
Other Models:
A-03Class A Stereo Amplifier« more » |
I-03Integrated Amplifier Model« more » |
A-80Mono-block Amplifier« more » |
C-03Linestage Preamplifier« more » |
E-03Dual Phono Stage Pre-amp/Demag« more » |
RZ-1Music System: Integrated amp / SACD / CD player / 32 bit USB + SPDIF DAC / Phonostage« more » |